Shenzhen TOPFLYtech Co., Limited. All Rights Reserved 7
4.2
SIM Card Installation
4.2.1
Use a pin to open the SIM card slot.
4.2.2
Put the nano SIM card on the bracket then insert to the tracker.
4.3
Installation
4.3.1
This is a plug-and-play tracker, before the installation, please ensure your car
support OBDII connector.
4.3.2
After plugged the tracker into the car OBDII connector, it will automatically power
on and the LED indicators will start to flash. This indicates a successful installation.
4.3.3
Please ensure the tracker is firmly connected to the car OBDII connector.
4.4
Ignition Detection
The tracker detects ignition status automatically.
5.
Tracker Configuration
Refer to frequently used operation commands in this manual
6.
Tracker Operation
6.1
Power on and off
6.1.1
Power on: Insert a SIM card and connect the tracker to external power. It will turn
on automatically.
6.1.2
Power off: Remove the SIM card first, then disconnect the tracker from external
power. It will power off automatically around 5~10 seconds.
6.2
Location Search
6.2.1
SMS Query
Send a location inquiry SMS command (refer to the Operation Command in this
manual) to the tracker. The location information will be sent to you through SMS.
6.2.2
Platform Query
Connect your tracker to the tracking platform then check the real-time position
online. (Additional tracking service charge may happen. Contact with your service
provider to get more details.)
7.
Quick Trouble Shooting
7.1
Unable to Connect to the Tracking Platform
7.1.1
Check the APN and IP settings.
7.1.2
Check the SIM card whether support specific network and the data service
whether is enabled.
7.1.3
Make sure there is no limitation or already added server IP to the IP white list
when using a M2M SIM card.
7.1.4
Check the remaining balance or network signal of the SIM card.
7.2
Tracker Shows Offline
7.2.1
Check the external power voltage to see whether the tracker is disconnected from
