3.2 Video and audio settings
19
digital receiver linked to your television via this connector,
you should set the
Video Output
option to your desired colour
model. If you have connected via the RCA connector labeled
VIDEO
on the back panel, you do not have to set this option
because the digital receiver outputs CVBS video through the
RCA connector independent of the SCART connector.
It is known in general that the RGB colour model provides the
best video quality with little difference from the YUV colour
model but the CVBS colour model does the least. So
RGB
would be most desirable for this option.
3.2.3
Video cassette recorder
You can have the digital receiver linked to your video cassette
recorder or such an appliance via the
VCR
SCART connector. In
that case, the digital receiver will operate differently depending
on the setting of the
VCR Scart Type
option. If the option is
set to
Standard
, the digital receiver will pass the video from
the video cassette recorder to your television when it starts
playback. But if the option is set to
External A/V
, the digital
receiver will not pass the video automatically. To pass it, you
have to press the
button.
NOTE
It is impossible for the digital receiver to record the video that
the video recorder plays back because the digital receiver is
just a bypass for the video recorder.
3.2.4
Television aspect ratio
If you have a wide-screen television, set the
TV Aspect Ratio
option to
16:9
.
Otherwise, if you have a normal-screen television, set the
TV
Aspect Ratio
option to
4:3
.
