12
DIP Switch #3–#4: Auto close time of the gate opener
DIP Switch #3: ON
– 30 Seconds
OFF
– 0
DIP Switch #4: ON
– 60 Seconds
OFF
– 0
NOTE: The auto close function would be disabled if both dip switches are turned to off (factory
default setting).
DIP Switch #5: Left/Right open
ON
– Left open (factory default setting).
OFF
– Right open. Turn switch OFF to change the opening direction easy if necessary.
How to Program or Erase the Remote
The remote MUST be programed to the opener BEFORE OPERATING. Please follow the steps to
program the remote.
Activate the opener only when gate is in full view, free of obstruction and properly adjusted. No
one should enter or leave gate area while gate is in motion. DO NOT ALLOW CHILDREN to
operate push button or remote. DO NOT ALLOW CHILDREN TO PLAY NEAR THE GATE.
If you purchase additional remote controls, the gate opener must be programmed to accept the
new remote code.
If you lose one of any remote control, please erase and reprogram all other remote controls to
have a new code for safety.
Program the remote
Press and release the learn button, the
REM
LED
light will be on, then press the key in the
remote twice in 2 seconds, the
REM LED
light
will flash for 4 seconds. Now the remote has
been programmed successfully.
Erase all the remote codes
Press and hold the learn button until the
REM
LED
light is off. Now all remote codes have been erased.
NOTE:
Max. 8 remotes can be programmed for the opener. An External Receiver (optional) allows up to
250pcs remotes to be programmed for the opener. TOPENS ERM12 Universal External Receiver is
available at TOPENS Store.
TOPENS ERM12 Universal External Receiver is also compatible with other brand swing gate
opener, sliding gate opener and garage door opener.
E.g. Auto close time of the gate operator is 30+60=90 seconds.
