Page 1
JSL02WS0101_Rev.B 2017/01
Model Number JSL-02WS
•
Customer Support
• Our Complete Product Catalog • Product Instruction Sheets
•
Energy Saving Tips • Product Specifications
• Glossary of Lighting Terms
This product comes with a:
FIVE YEARS LIMITED WARRANTY
Register your warranty on
www.topele.net
Your prompt product registration confirms your right to the protection available
Under the terms and conditions of your TOPELE warranty.
Protect yourself.
Before installing,read these
instructions carefully and save
them for future reference.
INSTALLATION INSTRUCTIONS
Visit topele.net to find complementary fixtures and more.
TM
LED MOTION DETECTOR SECURITY
FLOODLIGHT
WARNING
Page 2
Page 3
Figure 1
WARNING: RISK OF SHOCK
Electric current can cause painful shock
or serious injury unless handled properly.
For your safety, always:
• Turn off electrical power at fuse or circuit
breaker box before wiring fixture to the
power supply.
• Turn off the power when you perform
maintenance.
• Ground the fixture to avoid potential
electric shocks and to ensure reliable
starting.
• Double-check all connections to be sure
they are tight and correct. This fixture is
designed for use in a circuit protected by
a fuse or circuit breaker and to be installed
in accordance with national and local
electrical codes and ordinances.
If you are unsure about your wiring, consult
a qualified electrician or local electrical
inspector, and check your local electrical
code.
WARNING: RISK OF INJURY
• Some metal parts in the fixture may have
sharp edges. To prevent cuts and scrapes,
wear gloves when handling the parts.
• Account for small parts and discard
packing material, as these may be hazard-
ous to children.
CAUTION: RISK OF FIRE
• Minimum 90°C supply conductors.
7) Wire Nuts
INSTALLATION FIGURES
REQUIRED TOOLS
2) Adjustment Screw
4) Screw
8) Sponge Foam
3) Locknut
1) LED Light
5) Motion Sensor
6) Back Plate
FLOODLIGHT PACKING LIST
Description
Quantity
7) Wire Nuts................................................................. 2
1) LED Light................................................................. 2
2) Adjustment Screw.................................................... 1
4) Screw....................................................................... 2
5) Motion Sensor......................................................... 1
8) Sponge Foam.......................................................... 1
3) Locknut.................................................................... 1
6) Back Plate................................................................ 1
