User's Guide
NINJA CO2+ / NINJA CO2
EN
HOW TO USE MICRO AIRBOOSTER
WARNING
• Accepts all 16g threaded CO
2
cartridges.
• Recommended to use Topeak 16g threaded CO
2
cartridges.
• Please read all instructions before first use.
• Periodically check that components are still securely
fastened to your bike.
• Kompatybilne z serią Ninja Cage.
• If using the Micro AirBooster inflator continuously, make sure to wait 20 seconds in between cartridges for the
rubber grommet inside the inflation head to return to its original position. Otherwise, a gas leak may occur and
prevent proper inflation.
• Tighten the CO
2
cartridge before using CO
2
inflation function. Failure to do so will cause improper operation and
may cause injury.
• DO NOT remove CO
2
cartridge if it is still charged with gas. Completely discharge the CO
2
cartridge before removal.
• When opening the CO
2
cartridge, point the inflator head away from yourself and others.
• DO NOT use Micro AirBooster Inflator if any part is cracked or broken.
• DO NOT expose the CO
2
cartridge to heat, or store at temperatures above 120˚F (49˚C), or store in enclosed vehicles.
• Make sure to wear gloves when inflating to avoid injury.
• The barrel and CO
2
cartridge may become extremely cold/ frosty when the CO
2
gas is expelled.
• DO NOT try to unscrew the Micro AirBooster inflation head until it has warmed sufficiently to touch.
• Keep out of reach of children.
Presta Valve
Thread-in CO
2
cartridge.
Przed pompowaniem poluzuj trzpień
wentyla.
1
2
Start and regulate CO
2
flow by pushing
inflation head onto valve stem.
3
Install and thread-in inflation head
to Schrader valve.
Schrader Valve
Thread-in CO
2
cartridge.
Start and regulate CO
2
flow by pushing
inflation head onto valve stem.
1
2
3
After each inflation, make sure
all CO
2
gas has been discharged
by pushing the Micro AirBooster
inflation head several times.
Micro AirBooster
16g Topeak
Threaded CO
2
Cartridge x 2
CO
2
Cartridge
Engagement
Inflation Head
To avoid possible personal
injury and damage to bike
and /or tool, ensure to
disengage CO
2
inflator
properly after use by
unthreading inflation head
in correct direction.
NOTE
Tire Lever
NINJA CO2+
NINJA CO2
YES
NO
