![Topcon UA-10 Series Instruction Manual Download Page 4](http://html1.mh-extra.com/html/topcon/ua-10-series/ua-10-series_instruction-manual_1128672004.webp)
2
Safety Precautions
The instruction panels on the device and this Instruction Manual describes important things to prevent
the dangers to the operator or others and damages to your properties from being occurred, and to
secure your operating this device.
Be sure to understand the following indications and symbols, read the precautions and the contents,
and observe the written instructions fully.
Indication marks
Meaning of marks
This “Danger” mark indicates that ignoring this indication and
mishandling the system may cause dangerous accidents that may
cause death or severe injury to you or others.
This “Warning” mark indicates that ignoring this indication and
mishandling the device may cause death or severe injury to you or
others.
This “Caution” mark indicates that ignoring this indication and
mishandling the device may cause injury to you or others
*1
or
cause property damage
*2
.
*1 Injury stated here indicates the injury, burn, or electric shock that does not require you
hospitalization or visiting the hospital for a long time.
*2 Property damage stated here indicates the damages widely spread to the building, properties,
domestic animals, or pets.
Symbols
Meaning of symbols
This mark indicates the prohibited matter.
Detailed content of the prohibited matter is stated or indicated by the symbol
in or near the mark.
This mark indicates the instruction to be obeyed.
Detailed content of the prohibited matter is stated or indicated by the symbol
in or near the mark.
This mark indicates the caution (including the warning).
Detailed content of the prohibited matter is stated or indicated by the symbol
in or near the mark.
Warning
Danger
Caution
Summary of Contents for UA-10 Series
