47
3.14 Maintenance Recommendation Display
Set the display method of maintenance recommendation after one year has passed since you
purchased the instrument or calibration was performed.
There are two display methods.
ON:
Beep sound continues for 5 seconds and then, the system shifts to the next screen.
OFF: The maintenance recommendation is not displayed and the system shifts to the next
screen.
Note
The lapse of time after purchasing or calibration is indicated by months.
Display:
☞
“1.4 Maintenance Recommendation Display”.
The setting procedures are described below.
1.
Shift to the function mode. Access [MAINTAIN] from the function menu. Then, access the
[Maintenance Display] screen.
☞
“3.1.2 Entering/Returning from the Function Mode”.
2.
Press the [CHANGE] switch.
3.
Press the [ROTATION] switch to select ON or OFF.
Each time you press the [ROTATION] switch, ON and OFF are changed to each other.
4.
After selecting, press the [ENTER] switch.
Ｍａｉｎｔｅｎａｎｃｅ
Ｄｉｓｐｌａｙ
＊ＯＮ
