34
3.4 Single or Auto Run
Set the measuring method.
There are two measuring methods, “Single” (single measurement) and “Auto run” (continuous
measurement).
Measuring method
Single
(single measurement)
Press the [MEAS./HOLD] switch. The instrument performs
measurement once and finishes the work.
Auto Run
(continuous measurement)
Press the [MEAS./HOLD] switch. The instrument performs
measurement continuously until the [MEAS./HOLD] switch is pressed
again.
The procedures to set the measuring method are described below.
1.
Shift to the function mode. Access [MEASURE]
from the function menu. Then, access the
[Single or Auto Run] screen.
☞
“3.1.2 Entering/Returning from the Function Mode”.
2.
Press the [CHANGE] switch.
3.
Press the [ROTATION] switch to change to the desired measuring method.
Each time you press the [ROTATION] switch, the display is changed as shown below.
Single
→
Auto Run
4.
Press the [ENTER] switch to decide the measuring method.
＊Ｓｉｎｇｌｅ
ｏｒ
Ａｕｔｏ
Ｒｕｎ＊
＊Ｓｉｎｇｌｅ
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
