31
3.2.2 MANU (Manual) Mode
When se
lecting “MANU” as the measurement mode, set the integral time.
Input the integral time to be used in “MANU” mode.
1.
Shift to the function mode. Access [MEASURE]
from the function menu. Then, access the [Integ
Time Input] screen.
☞
“3.1.2 Entering/Returning from the Function Mode”.
2.
Press the [CHANGE] switch.
3.
Input the desired numerical value according to the numerical value input method.
You can input the numerical values within the “20 – 15000ms” range.
Setting method:
☞
“3.1.3 Setting Numerical Value”.
4.
Press the [ENTER] switch to decide the value.
＊
Ｉｎｔｅｇ
Ｔｉｍｅ
Ｉｎｐｕｔ
＊
Ｉｎｔｅｇ［ｍｓ］＝
１００
ENTER
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
CHANGE
ROTATION
SHIFT
FUNCTION
