Topcon SR-3AR Instruction Manual Download Page 75

Page: 75 / 140

- 64 -

3.20 Panel Light Control

It is possible to control the ON/OFF status of LCD screen and switch LED automatically.

When measuring with this function, low light emitted from LCD Screen or switch LED does not

affect measurement. Finally, it is available to measure with high precision.

Use the following procedure to set.

Switch to the function mode to display the [DISPLAY]-[Auto Panel Light].

☞

'3.1.2 Entering/Returning from the Function Mode'

Press the [CHANGE] switch.

Press the [ROTATION] switch to select the desired value.

Each time the switch is pressed, the value changed between on and off.

Press the [ENTER] switch to accept the displayed value.

This function can reduce power consumption.

＊

Ａｕｔｏ

Ｐａｎｅｌ

Ｌｉｇｈｔ＊

＊ＯＮ

Note

Summary of Contents for SR-3AR













































































































































Search results

Summary of Contents for SR-3AR

Reviews:

Related manuals for SR-3AR

Brands by name

Popular brands

Topcon SR-3AR, Instruction Manual

Search results

Summary of Contents for SR-3AR

Reviews:

Related manuals for SR-3AR

Brands by name

Popular brands