- 48 -
3.8 RS-232C Parameters
Set the RS-232C interface parameters. This is required to connect the SR-LEDW/SR-UL2/SR-
UL1R/SR-3AR to a PC with an RS-232C cable.
Set the parameters of the RS-232C with the function mode. In this example, "Baud rate
9 600/Data length 8/Parity None/Stop bit 2" will be changed to "Baud rate 38 400/Data
length 7/Parity ODD/Stop bit 1".
The RS-232C Parameters screen is not displayed if the PC Connection method is set to USB.
1
Switch to the function mode to display the [COMM]
-[RS-232C Parameter].
☞
'3.1.2 Entering/Returning from the Function Mode'
＊ＲＳ－２３２Ｃ
Ｐａｒａｍｅｔｅｒｓ＊
Ｂａｕｄ
ｒａｔｅ＝
９６００
Ｌｅｎｇｔｈ＝８
Ｐａｒｉｔｙ＝ＮＯＮＥ
Ｓｔｏｐ
ｂｉｔ＝
２
2
To set the parameters, press the [CHANGE] switch. The parameter which can be
changed blinks.
＊ＲＳ－２３２Ｃ
Ｐａｒａｍｅｔｅｒｓ＊
Ｂａｕｄ
ｒａｔｅ＝
９６００
Ｌｅｎｇｔｈ＝８
Ｐａｒｉｔｙ＝ＮＯＮＥ
Ｓｔｏｐ
ｂｉｔ＝
２
3
Press the [ROTATION] switch to change "Baud rate" to "38 400".
＊ＲＳ－２３２Ｃ
Ｐａｒａｍｅｔｅｒｓ＊
Ｂａｕｄ
ｒａｔｅ＝
９６００
Ｌｅｎｇｔｈ＝８
Ｐａｒｉｔｙ＝ＮＯＮＥ
Ｓｔｏｐ
ｂｉｔ＝
２
"Baud rate" is changed in the following order:
38400
→ 4800 → 9600 → 19200
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
Note
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
