Topcon Slit Lamp SL-2G, Instruction Manual

Page: 32 / 44

30
MAINTENANCE AND CHECKUPS
REPLACING ILLUMINATION LAMPS
1
Turn the Power switch & Brightness control knob to OFF.
2
Remove the power cable from the illumination unit.
3
Remove the screws attaching the lamp cover with a hexagon wrench, and remove the
lamp cover by pulling it downward.
CAUTION
When replacing the lamp, switch off the power supply and
remove the power cable to avoid electric shocks.
CAUTION
To avoid burns, beware of high temperatures when replacing
the lamp immediately after switching it off.
NOTE
To ensure perfect illumination, make sure that the socket
flange and notch are firmly fitted.
When the external fixation target (optional) is attached, remove the connector from
the external fixation target.
When removing the lamp cover,
be careful
of the connecting cable.
Lamp cover
Connecting cable