27
3.2
Detail of Function mode
3.2.1
Specify average number
When you select [AVE] in [SINGLE/ AVE] switch in the measurement mode, The RD-80SA
measure repeatedly for a specified number of iterations and calculate the average of measured
value over specified repetitions of the measurement. This describe that the procedure to specify
the number of measurement.
The number of measurement can be specified from 2 to 20.
☞
「
1.2 Names and functions of parts
」
☞
「
3.1.2 Setting Menu / Confirm setting data
」
1
Press [CHANGE] switch
2
Press [ROTATION] switch to select options.
Each time you press [ROTATION] switch, the number is changed as follows;
2
→ 3 → …… → 20 → 2 ……
3
After specify the number, press [ENTER] switch to confirm.
＊ ＡＶＥＲＡＧＥ ＭＥＡＳＵＲＥ ＊
ＡＶＥＲＡＧＥ ５
Summary of Contents for RD-80SA
Page 1: ...Instruction Manual Luminance Colorimeter Rev 6...
Page 2: ......
