Topcon Pocket-3D, Reference Manual, Page: 65 / 316

mmGPS Applications
P/N 7010-0628
2-19
Equipment
For further details on the Equipment menu option and setup screens,
see “Equipment” on page 2-2. During rover equipment setup for
mmGPS applications, an additional screen configures GPS
connections; machine setups for mmGPS remains the same.
mmGPS Transmitters
Transmitter calibration data must first be downloaded into Pocket-3D
using the
Transmitters
tab (Figure 2-28 on page 2-20). Once this tab
contains a list of transmitters, up to four transmitters can be set up on
unique channels using the channel tabs (see below). The channel
button on the transmitter determines the channel that the transmitter
broadcasts on.
To set up transmitter information, tap
Setup

mmGPS transmitters
(Figure 2-27).
Figure 2-27. Setup

mmGPS Transmitters
The Transmitters tab
performs the following (Figure 2-28 on
page 2-20):
•
To select a Serial Cable
– select the communication port used
between the controller and transmitter; either COM or
Bluetooth® comport.
•
To add a transmitter
– tap
Add
and enter a transmitter serial
number or other description.
•
To delete a transmitter
– select a transmitter and tap
Delete
.