41
10.CONNECTING TO EXTERNAL DEVICES
The OS supports
Bluetooth
wireless technology, USB and RS232C for communication with data
collectors etc. Inputting/outputting data is also possible by inserting a USB memory or by connecting
to a USB device.
Read this manual in conjunction with the operator’s manual for the relevant external device.
•
Bluetooth
communication is only possible with instruments incorporating the
Bluetooth
module.
• When doing
Bluetooth
communication, read "4.3 Bluetooth Wireless Technology"
The
Bluetooth
module incorporated in the OS can be used for communication with
Bluetooth
devices
such as data collectors.
Bluetooth
connection mode
Communication between a pair of
Bluetooth
devices requires one device to be set as the
"Master" and the other as the "Slave". To initiate connections from the OS side, set the OS as
the "Master" device. To initiate connections from the paired device side, set the OS as the
"Slave" device. Always set the OS to "Slave" when connecting with a data collector to perform
measurements and to record the data. Only "Slave" can be selected when the instrument is
shipped.
PROCEDURE Set
Bluetooth
communication mode to "Slave"
1. Select "Comms" in Config mode.
10.1
Wireless Communication using
Bluetooth
Technology
