Receiver and File Maintenance
NET-G3A Operator’s Manual
4-8
2. Navigate to the Topcon Memory Cards device directory, and click
the device icon.
3. Click the desired, formatted memory card device icon.
To download data files:
After
formatting the card, select and copy, or select and drag-and-
drop, the desired files into a directory on the computer. During the
downloading process, the REC LED will blink yellow every second.
Do not remove the UMS device until the REC LED stops blinking.
Figure 4-9. Import From Memory Card
Deleting Data Files from an
Installed Memory Card
A memory card holds a finite amount of collected data. To free up
space for more or new data, delete old data. For more information on
managing the receiver’s memory, see “Managing Receiver Memory”
on page 4-10. The following steps use PC-CDU to delete files, but
any Topcon receiver management software can be used.
You can also configure the receiver to automatically delete files using
the first-in-first-out function (see “Automatic File Rotation Mode
(AFRM) parameters” on page 3-12 for details).
1. Connect your receiver and computer. See “Connecting the
Receiver and a Computer” on page 2-15 for information about
this procedure.
Net-G3A_OM_Book.book Page 8 Thursday, May 14, 2009 8:49 AM
