Check This First!
P/N 7010-0935
5-1
Troubleshooting
This chapter will help you diagnose and solve some common
problems you may encounter with your receiver.
Check This First!
Before contacting Topcon support, check the following:
• Check all external receiver connections carefully to ensure
correct and secure connections.
• Double check for worn or defective cables.
• Check all power sources.
• Check that the most current software is downloaded onto the
computer and that the most current firmware is loaded into the
receiver. Check the Topcon website at
www.topconpositioning.com for the latest updates.
Then, try the following:
• Reset the receiver using PC-CDU (
Tools
Reset receiver
).
• Restore default settings using PC-CDU (
Configuration
Receiver
, and then click
Set all parameters to defaults
).
• Clear the NVRAM (see “Clearing the NVRAM” on page 4-18).
• Initialize the file system (click
Tools
Initialize file system
).
This erases all files inside the receiver.
If the problem persists, see the following sections for other solutions.
WARNING
Do not attempt to repair equipment yourself. Doing
so will void your warranty and may damage the
hardware.
Net-G3A_OM_Book.book Page 1 Thursday, May 14, 2009 8:49 AM
