Topcon mmGPS 3D Paver, Reference Manual

Page: 20 / 288

Introduction
mmGPS 3D Paver Reference Manual
1-6
Figure 1-6. Pocket-3D (Main Screen) on the FC-100
Machine Components
Regardless of the application, the machine requires the following
components.
PZS-MC Sensor
The PZS-MC sensor (Figure 1-7 on page 1-7)
replaces the machine-mounted GPS antenna. The PZS-MC sensor
combines the MC-A1 GPS antenna with laser sensor technology into
a total package. LazerZone™ technology allows the sensor to detect
up to four different PZL-1 laser transmitters for increased range. The
sensor attaches to a GPS vibration pole on the machine blade, and
cables connect the receiver to the MC-2.5 Receiver Box for sending
corrections to the 9168 control box.
NOTE
Dummy connectors are
Sold Separately.
They do
not come in the Kit.