Topcon mmGPS 3D Paver, Reference Manual

Page: 141 / 288

View Menu
P/N 7010-0781
3-71
The Light bar
is used for steering indication where the green zone
indicates “on-grade”. For details on the Light Bar pop-up menu, see
“Changing the Light Bar Scale” on page 3-75.
Figure 3-73. Lower Window Views
Display Options
To set the type of units used in the job, press
Topcon Logo View
Display options Display units
to display the
Display Units
dialog
box (Figure 3-74 on page 3-72).
Using this dialog box, change the type of units displayed on the
screen, or update preset units in the files currently being used. Note
that any conversion will not affect grade accuracy.
• Distances – select either Meters, US survey feet, International
feet, or Feet+Inches (measures to a fraction of an inch).
If using Feet+Inches, all values show as 1'11''1/2 where 12 inches
equal 1 foot and any value smaller than an inch shows as a
fraction of an inch.
• Distances, decimal places – select the number of decimal places,
from zero to four.
• Angles – select either DDº MM’SS”, NDDº MM’SS”, or Gons.
• Grades – select either Percent (%), Run: Rise, or Rise: Run.