Topcon mmGPS 3D Paver, Reference Manual, Page: 137 / 288

View Menu
P/N 7010-0781
3-67
Left Window
Display options for the left window include a Profile view, a Section
view, and a Grade indicator.
To access the lower window view, press
Topcon Logo View Left
window
(Figure 3-68), then tap the view you want; a check mark
indicates the active view. None indicates no left window is active.
Figure 3-68. Left Window Display Menu Selections
Selecting one of the options adds the view as a window at the left side
of the main window (Figure 3-69 on page 3-68).
The Profile view
displays a side view of the machine where the right
side of the view is always the forward direction of machine travel.
The “+/-” buttons increase and decrease magnification for this Left
window view.
The Section view
displays a cross section view of the screed and the
selected Design Surface where the right side of the view is the right
side of the screed. The cut/fill readings are provided on both sides of
the screed and represent how far the screed is from on-grade. The
“+/-” buttons increase and decrease magnification for this Left
window view.
The Grade indicator
view acts as an infinitely scrolling grade tape,
displaying the amount of cut or fill in regards to the design surface.
For details on the Grade indicator pop-up menu, see “Changing the
Grade Indicator” on page 3-73.