Indicator
TOPCON CORPORATION
75-1 Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan
www.topcon.co.jp
TOPCON POSITIONING SYSTEMS, INC.
7400 National Drive, Livermore, CA 94551, U.S.A.
Phone: 925-245-8300 Fax: 925-245-8599 www.topcon.com
TOPCON CALIFORNIA
3380 Industrial Blvd, Suite 105, West Sacramento, CA 95691, U.S.A.
Phone: 916-374-8575 Fax: 916-374-8329
TOPCON EUROPE POSITIONING B.V.
Essebaan 11, 2908 LJ Capelle a/d IJssel, The Netherlands.
Phone: 010-458-5077 Fax: 010-284-4941 www.topconeurope.com
TOPCON DEUTSCHLAND G.m.b.H.
Giesserallee 31, 47877 Willich, GERMANY
Phone: 02154-885-100 Fax: 02154-885-111 [email protected]
www.topcon.de
TOPCON S.A.R.L.
89, Rue de Paris, 92585 Clichy, Cedex, France.
Phone: 33-1-41069490 Fax: 33-1-47390251 [email protected]
TOPCON SCANDINAVIA A. B.
Neongatan 2 S-43151 Mölndal, SWEDEN
Phone: 031-7109200 Fax: 031-7109249
TOPCON (GREAT BRITAIN)LTD.
Topcon House Kennet Side, Bone Lane, Newbury, Berkshire RG14 5PX U.K.
Phone: 44-1635-551120 Fax: 44-1635-551170
[email protected] [email protected]
TOPCON SOUTH ASIA PTE. LTD.
Blk 192 Pandan Loop, #07-01 Pantech Industrial Complex, Singapore 128381
Phone: 62780222 Fax: 62733540 www.topcon.com.sg
TOPCON INSTRUMENTS (THAILAND) CO., LTD.
77/162 Sinn Sathorn Tower, 37th Fl.,
Krungdhonburi Rd., Klongtonsai, Klongsarn, Bangkok 10600 Thailand.
Phone: 02-440-1152~7 Fax: 02-440-1158
TOPCON INSTRUMENTS (MALAYSIA) SDN. BHD.
Excella Business Park Block C, Ground & 1st Floor, Jalan Ampang Putra,
Taman Ampang Hilir, 55100 Kuala Lumpur, MALAYSIA
Phone: 03-42701068 Fax: 03-42704508
TOPCON KOREA CORPORATION
2F Yooseoung Bldg., 1595-3, Seocho-Dong, Seocho-gu, Seoul, 137-876, Korea.
Phone: 82-2-2055-0321 Fax: 82-2-2055-0319 www.topcon.co.kr
TOPCON CORPORATION BEIJING OFFICE
Block No.9, Kangding Street
Beijing Economic Technological Development Area, Beijing, China 100176
Phone: 10-6780-2799 Fax: 10-6780-2790
TOPCON CORPORATION DUBAI OFFICE
P. O Box293705, Office C-25(row C-2), Dubai Airport Free Zone, Dubai, UAE
Phone: 971-4-2995900 Fax: 971-4-2995901
IRELAND OFFICE
Unit 69 Western Parkway Business Center
Phone: 01460-0021 Fax: 01460-0129
Lower Ballymount Road, Dublin 12, Lreland
5E
Height alert warning of
rotating laser
A flash signifies that the height alert function of rotating
laser is operating.
(This function is not usable to the rotating laser which does
not have the height alert and the function to output alarm
signal.)
Rotating laser battery warning display
A flash shows that the rotating laser power is low.
(This function is not usable to the rotating laser which does
not have the function to output alarm signal.)
Goes out:
Battery is sufficient. (When Mode 1 is selected, the lamp will
light up.)
Flashes slowly:
The power is low, but sensor is still usable.
Flashes quickly:
Dead battery. Replace the dry battery with new one.
Mode1
Mode2
Mode3
Mode4
Precision mode
Auto-cut off function
The power will be turned off automatically after detecting no laser beam for
more than approx. 60 minutes.
(To turn on the laser sensor, press the power switch again.)
Mode1: ±3mm
(0.009ft)
Mode2: ±6mm
(0.019ft)
Mode3: ±15mm
(0.049ft)
Mode4: ±30mm
(0.098ft)
When the laser
beam is off to the top
or to the bottom
Specifications
Detective range
:
175mm (6.8inches)
Detective angle
:
360°
Detective precision
:
Mode1: ±3mm (0.009ft)
:
Mode2: ±6mm (0.019ft)
:
Mode3: ±15mm (0.049ft)
:
Mode4: ±30mm (0.098ft)
Detectable laser wave length
:
633 to 785nm
Laser detecting range
(diameter)
:
800m (2625ft)
(Using RL-100 1S/2S)
Internal battery
:
:
C-size dry cells 4pcs.
Battery pack BT-68Q
(sold separately)
External power supply
:
DC 10V to 30V
Continuous operating time
(+20°C/+68°F)
:
:
Approximately 100 hours
(Using alkaline manganese dry cells)
Approximately 50 hours
(Using Battery pack BT-68Q)
Operating temperature
:
-20°C to +50°C (-4°F to +122°F)
Water proof
:
IP66 (Based on the standard IEC60529)
Dimensions (W/D/H)
:
158x166x357 (mm) (6.2"x6.5"x14.0")
(With Mechanical Clamp)
Weight (Without cells)
:
2.0kg (4.4lbs)
Detective angle, Detective precision and Laser detecting range may vary depending on rotat-
ing laser being used or atmospheric conditions.
Battery using time will vary depending on environmental conditions and operations done with
LS-B100.
Flashes slowly
Laser beam positions and display patterns
Indicator (LED)
±50mm/±0.16ft
(100mm/0.32ft width)
±87.5mm/±0.28ft
(175mm/0.57ft width)
Detective precision
Flashes quickly
Flashes more slowly
Battery remaining display
Battery remaining display LED
Power-save function
The instrument turns the power-save mode after detecting no
laser beam for more than approx. five minutes.
During the power-save mode, LED (1 yellow, 1 red) will flash.
(The mode is canceled automatically when the instrument
detects a laser beam again. The mode can also be canceled
by pressing the power switch again.)
Rotating laser battery
remaining warning LED
Flashes
Flashes
Connector for external power supply
Connecting the connector cable PC-18 (sold separately) to the connector for
external power supply will enable the use of the LS-B100 from an external
power supply. When the instrument is operated with the external power supply,
the power-save and the auto-cut off functions will be invalidated. The LS-B100
will turn on when connection is made to external power supply. The power
switch of the instrument will not function when an external power supply is
used.
It is possible to change the detective precision of the
instrument.
Please select Mode 1 to 4 according to the objective of the
operation.
Pressing the detective precision (Mode) switch will change
the mode and the corresponding LED lamp will light up.
(During battery remaining display shown below, the lamp
will flash.)
Battery remaining for the LS-B100 will be displayed at 3 levels.
* When turning the power on by pressing the power switch for more than
5 seconds, the power-save and the auto-cut off functions may be inval-
idated.
31267 90021
