Topcon KR-1W, Instruction Manual

Page: 50 / 188

48
BASIC OPERATIONS
IN A CASE LIKE THIS
TO STOP AUTO ALIGNMENT MEASUREMENT IN THE MIDDLE
PRESSING THE MANUAL BUTTON TO STOP AUTO ALIGNMENT
Press the AUTO button and press the MEASUREMENT switch : measure-
ment operation restarts.
To finish measurement, output data by tapping the DATA OUT button , or clear
data by tapping the ALL CLEAR button .
STOP THE MEASUREMENT BY OPERATING THE CONTROL LEVER
Tilt the control lever and pull toward the operator. The main body will move away from the
patient.
To resume measurement, tilt the control lever toward the patient, and bring the
main body slowly into focus with the patient's eye. In auto measurement mode, the
measurement operation starts automatically when focus is reached.
To finish measurement, either tap the DATA OUT button to output data, or tap
the ALL CLEAR button to delete data.
TO MEASURE THE RIGHT/LEFT EYE ONLY
Normally continuous measurement is used. To measure the right or left eye only, perform
the following operations. For details, see "MEASURING ONE EYE ONLY" on page 35.