Topcon KR-1W Instruction Manual Download

Page: 30 / 188

Use the external device complying with IEC60950/IEC60950-1, UL60950/
UL60950-1 or UL60601-1.

PREPARATIONS

CONNECTING EXTERNAL I/O TERMINALS

DATA OUTPUT

This instrument can be connected to a personal computer and external printer etc. via the
RS232C or USB terminals.

Connect one end of the RS232C cable to the RS232C OUT terminal on the instrument.

Connect the other end of the RS232C cable to the PC and other external device.

USB OUT terminal (USB B)

RS232C OUT terminal

LAN I/O terminal

USB I/O terminal (USB A)

The USB I/O terminal (USB A) is used to connect a keyboard, mouse and color
printer. The USB OUT terminal (USB B) is used to connect an external PC, etc.
When connecting a USB cable, be sure to use the cable with correct shape of
plug.

For external printer inquiries, call your dealer or TOPCON at the address printed
on the back cover of this manual.

DATA INPUT

This instrument is provided with a USB IN terminal

For inquiries about the USB in terminal, call your dealer or TOPCON at the
address printed on the back cover of this manual.

LAN OUTPUT

This instrument can be connected to a PC on local area network (IMAGEnet etc.) via the LAN
OUT terminal.

Connect the Ethernet cable to the LAN I/O terminal of this instrument.

Connect the other end of the Ethernet cable end to the external device.

For inquiries about the LAN connectivity, call your dealer or TOPCON at the
address printed on the back cover of this manual.

Summary of Contents for KR-1W





























































































































































































Search results

Summary of Contents for KR-1W

Reviews:

Related manuals for KR-1W

Brands by name

Popular brands

Topcon KR-1W, Instruction Manual

Search results

Summary of Contents for KR-1W

Reviews:

Related manuals for KR-1W

Brands by name

Popular brands