Topcon KR-1W, Instruction Manual

Page: 155 / 188

153
FUNCTION SETTING USING SETTINGS
SETTING REF/KRT DATA OUTPUT
When the DATA OUT button is pressed, outputting measurement data to a connected PC,
while simultaneously printing with the internal printer, can be set to ON or OFF. Before ship-
ment, the default setting is OFF.
1
Tap the Set Condition button of the set item display "REF/KRT Data Output" of "NET-
WORK."
2
Tap the Setting Change button and select "ON" or "OFF."
3
Setting is complete.
SETTING THE KR-1W IP ADDRESS
The IP address of KR-1W can be set.
1
Tap the Set Condition button of the set item display "KR-1W IP Address" of "NET-
WORK. "
2
Enter the number by the ten-key display of the Setting Change button .
3
Setting is completed by tapping the OK button .
SETTING THE KR-1W SUBNET MASK
The subnet mask of KR-1W can be set.
1
Tap the Set Condition button of the set item display "KR-1W Subnet Mask" of "NET-
WORK. "
2
Using the ten-key display of the Setting Change button , enter the same subnet mask as
that of the PC to be connected.
3
Setting is completed by tapping the OK button .
SETTING THE KR-1W DEFAULT GATEWAY
The default gateway of KR-1W can be set.
1
Tap the Set Condition button of the set item display "KR-1W Default Gateway" of "NET-
WORK. "
2
Using the ten-key display of the Setting Change button , enter the same default gateway
as that of the PC to be connected.
3
Setting is completed by tapping the OK button .