Topcon KR-1W, Instruction Manual

Page: 147 / 188

145
FUNCTION SETTING USING SETTINGS
PRINT STYLE OF KRT VALUES (KRT DATA)
The print style of KRT values (cornea shape measurement values) can be set. Before ship-
ment, the default setting is "ALL" (Print all data).
1
Tap the Set Condition button of the set item display "KRT Data" of "PRINT INT."
2
Tap the Setting Change button and select desired print out style.
"ALL"
: All data are displayed in printout.
"AVE" : Only average values are displayed in printout.
"CLASSIC" : All diopter values of KRT data are displayed in printout.
"CLASSIC 2" : All REF data are displayed in printout, and only typical values of diopter
values in KRT data are displayed in printout.
3
Setting is complete.
PRINTING KRT AVERAGE VALUES (KRT AVERAGE)
Average KRT values (cornea shape measurement values) can be printed. Before shipment,
the default setting is "ON" (Print average values).
1
Tap the Set Condition button of the set item display "KRT Average" of "PRINT INT."
2/ 2
ON
OFF
ON
ON
ALL
ON
D/mm
ON
ON
SETTINGS
MEASURE
INITIAL
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
S.E. Data
PD Data
KRT Data
KRT Average
Data Order
KRT CYL
TOPCON Logo
2
Tap the Setting Change button and select "ON" (Print average values) or "OFF" (Do not
print average values).
3
Setting is complete.