Topcon KR-1W, Instruction Manual

Page: 131 / 188

129
FUNCTION SETTING USING SETTINGS
2
Tap the Setting Change button and select "ON" or "OFF."
3
Setting is complete.
SETTING THE TOTAL ABERRATION MAP OVERLAY - mm GRID SCALE
When analysis results are initially displayed, Total Aberration Map Overlay - mm Grid Scale
can be set to ON or OFF. Before shipment, the default setting is "OFF."
1
Tap the Set Condition button of the set item display "Total Aberration Map Overlay - mm
Grid Scale" of "DISPLAY."
2
Tap the Setting Change button and select "ON" or "OFF."
3
Setting is complete.
Display step setting of the Total aberration map can also be done by the Enlarge-
ment Display screen.
For details, see "ENLARGEMENT DISPLAY, Example: Total Aberration" on page
79.
SETTING THE HIGH ORDER ABERRATION ASTIGMA MAP DISPLAY STEP
The Higher Order Aberration Astigma Map Display Step is set. Before shipment, the default
setting is "5.00
µ
m."
1
Tap the Set Condition button of the set item display "HOA. Astig. Map Range" of "DIS-
PLAY."
2
Enter the number by the ten-key display of the Setting Change button .
3
Setting is completed by tapping the OK button .
Display step setting of the Total aberration map can also be done by the Enlarge-
ment Display screen.
For details, see "ENLARGEMENT DISPLAY, Example: Total Aberration" on page
79.
SETTING THE HIGHER ORDER ABERRATION ASTIGMA MAP OVERLAY - CROSS SCALE
When analysis results are initially displayed, Higher Order Aberration Astigma Map Overlay -
Cross Scale can be set to ON or OFF. Before shipment, the default setting is "ON."
1
Tap the Set Condition button of the set item display "HOA. Astig. Map Overlay - Cross
Scale" of "DISPLAY."
2
Tap the Setting Change button and select "ON" or "OFF."
3
Setting is complete.