Topcon KR-1W, Instruction Manual

Page: 113 / 188

111
FUNCTION SETTING USING SETTINGS
INITIAL SETTING (INITIAL)
INITIAL contains settings related to the initial status upon power on. Measurement functions
including measurement mode, auto mode and the number of continuous measurements, as
well as the display of the measurement results, the date and language can be set.
1
Tap the index "INITIAL" of the "SETTTINGS screen." Set items for initial setting are dis-
played.
R/K
SETTINGS
MANUAL
MONO
3
ONCE
R
LEVEL3
12mm
Use pupil
MEASURE
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
INITIAL
Init Measure Mode
Init Auto
R-L Measure
Cont. Cycle
Cont. Fog
Finish Mode
Target Brightness
VD
ZernikePD
To exit from this screen
2
Tap the Page Feed button and/or Page Feed button , as needed, till the set item to be
checked/changed is displayed.
SETTING OF MEASUREMENT MODE (INIT MEASURE MODE)
The initial measurement mode, at power on, can be changed. Before shipment, the default
setting is "R/K."
1
Tap the Set Condition button of the set item display "Init Measure Mode" of "INITIAL."
2
Tap the Setting Change button and select the desired measurement mode.
3
Setting is done.
• Tap the .
• The "SETTTINGS screen" is exited and the "MEASUREMENT screen" is
returned.
EXIT button