Topcon GTS-600 Series, Instruction Manual

Page: 68 / 144

4-24
4 PROGRAM MODE
4.6.3 Search Data and View Jobs
The Search Data and View Jobs option can find point numbers with coordinate values and show all jobs
in memory. The options for the search feature are [F1] search first point number, [F2] last point number,
or [F3] by any point number. Point numbers and coordinate values can not be edited in any search
feature.
Another option in the Search Data and View Jobs is a feature that allows the user to view the job stored
in memory by pressing the [F4] key. Also provided is the ability to select another job in memory.
When searching for the side shot point number in a job, a line under the record number will be
displayed, (3PT#:3). The resection point number stored in a job will show the record number in a box, (5
PT# 5)
Follow the instruction below for the Search Data & View Jobs option.
Operating procedure Operation Display
1
From the options layout menu, press [F3] for
the Coordinate data option.
2
Press [F2] for the Search & View Jobs.
[F3]
[F2]
3
To search for the first point number, press
[F1] (First).
[F1]
4
The first point number with coordinates
appear on the display. To view more point
numbers on the display, press [F6] (
↓ ).
Press [F1] to exit.
3
To search for the last point number, press
[F2] (Last).
[F2]
4
The last point number with coordinates
appear on the display. To view more point
numbers on the display, press [F5] (
↓
).
Press [F1] to exit.
LAYOUT
F1 Setting Direction Angle
F2 Setting Layout Point
F3 Coordinate data
F4 Options
Coordinate Data
F1 Input Coordinate data
F2 Search Data & View Jobs
F3 New Point
F4 Grid Factor
Search Data & View Jobs
F1 First
F2 Last
F3 PT#
F4 View Memory
1PT# :1
N : 1000.000
E : 1000.000
Z : 100.000
EXIT
↑ ↓
Search Data & View Jobs
F1 First
F2 Last
F3 PT#
F4 View Memory
50PT# :25
N : 10.000
E : 9.909
Z : 98.75
EXIT
↑ ↓