manualshive.com logo in svg

Topcon GPT-7500 Series, Instruction Manual

Share
Download
Topcon GPT-7500 Series Instruction Manual Download Page 118

116

   12   SPECIAL ACCESSORIES

12

SPECIAL ACCESSORIES

Mini prism 

The mini prism (25.4mm) is made from precision 
ground glass and mounted in high impact plastic 
housings.
The mini has the unique capability of being positioned 
either at a "0" or "–30" with the same prism.

Tribrach TR-2

This is detachable tribrach having tribrach fixing 
screw. 

Optical plummet tribrach TR-2P

This is detachable tribrach having built-in optical 
plummet telescope.
(Compatible with Wild)

Trough compass, Model 6

Shock proof construction. No clamp is necessary 
when carrying the instrument.

Solar filter, Model 6

A filter designed exclusively for direct collimation of 
the sun.
Solar filter of flap-up type.

Diagonal eyepiece, Model 10

Observation in an easy posture will be provided up
 to the zenith position

Solar reticle, Model 6

A reticle designed for collimation of the sun.
Can be used together with Solar Filter.

Summary of Contents for GPT-7500 Series







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands