Battery Charging
The battery (BDC70) was not charged at the factory. Charge the battery
fully before using the instrument.
1. Connect the power cable to the charger and plug the charger into the
wall outlet.
2. Mount the battery in the charger by matching the grooves on the bat-
tery with the guides on the charger. When charging starts, the lamp
starts blinking.
3. The lamp lights when charging is finished.
• Be sure to charge the battery within the charging temperature range.
Charging temperature range: 0 to 40°C
Installing the Battery
1. Slide down the catch on the battery
cover to open.
2. Checking the terminal side on the
battery, insert the battery as shown.
• Do not insert the battery inclined. Doing so may damage the
instrument or battery terminals.
3. Close the battery cover. A click is heard when the cover is secure.
Upon opening, make sure that all the following are included.
Standard Package Components
For the safe use of the product and prevention of injury to operators and other
persons as well as prevention of property damage, items which should be
observed are indicated by an exclamation point within a triangle used with
WARNING and CAUTION statements in this operator’s manual.
The definitions of the indications are listed below. Be sure you understand
them before reading the manual’s main text.
Definition of Indication
General
WARNING
Ignoring this indication and making an operation error could
possibly result in death or serious injury to the operator.
CAUTION
Ignoring this indication and making an operation error could
possibly result in personal injury or property damage.
This symbol indicates items for which caution (hazard warnings inclusive) is
urged. Specific details are printed in or near the symbol.
This symbol indicates items which are prohibited. Specific details are printed in
or near the symbol.
This symbol indicates items which must always be performed. Specific details
are printed in or near the symbol.
Warning
Do not use the unit in areas exposed to high amounts of dust or ash, in areas
where there is inadequate ventilation, or near combustible materials. An
explosion could occur.
Do not perform disassembly or rebuilding. Fire, electric shock, burns, or
hazardous radiation exposure could result.
Never look at the sun through the telescope. Loss of eyesight could result.
Do not look at reflected sunlight from a prism or other reflecting object through
the telescope. Loss of eyesight could result.
Direct viewing of the sun during sun observation will cause loss of eyesight.
Use solar filter (option) for sun observation.
When securing the instrument in the carrying case make sure to set all the
locks. Failure to do so could result in the instrument falling out while being
carried, causing injury.
Caution
Do not use the carrying case as a footstool. The case is slippery and unstable
so a person could slip and fall off it.
Power Supply
Do not place the instrument in a damaged case or in a case with a damaged
belt. The case or instrument could be dropped and cause injury.
Do not wield or throw the plumb bob. A person could be injured if struck.
Secure handle to main unit. Failure to properly secure the handle could result in
the unit falling off while being carried, causing injury.
Tighten the adjustment tribrach clamp securely. Failure to properly secure the
clamp could result in the tribrach falling off while being carried, causing injury.
Warning
Do not disassemble or rebuild the battery or the battery charger, nor expose to
heavy shocks or vibration. Sparking, fire, electric shock or burns could result.
Do not short circuit. Heat or ignition could result.
Do not place articles such as clothing on the battery charger while charging
batteries. Sparks could be induced, leading to fire.
Do not use voltage other than the specified power supply voltage. Fire or
electrical shock could result.
Do not use batteries other than those designated. An explosion could occur, or
abnormal heat generated, leading to fire.
Do not use damaged power cords, plugs or loose outlets. Fire or electric shock
could result.
Do not use power cords other than those designated. Fire could result.
Use only the specified battery charger to recharge batteries. Other chargers
may be of different voltage rating or polarity, causing sparking which could lead
to fire or burns.
Do not use the battery or charger for any other equipment or purpose. Fire or
burns caused by ignition could result.
Do not heat or throw batteries or chargers into fire. An explosion could occur,
resulting in injury.
To prevent shorting of the battery in storage, apply insulating tape or equivalent
to the terminals. Otherwise shorting could occur resulting in fire or burns.
Do not use the battery or the battery charger if its terminals are wet. Resultant
poor contact or shorting could lead to fire or burns.
Do not connect or disconnect power supply plugs with wet hands. Electric
shock could result.
Caution
Do not touch liquid leaking from batteries. Harmful chemicals could cause
burns or blisters.
Tripod
Bluetooth
wireless technology/Wireless LAN
Laser Safety
Refer to "LASER SAFETY INFORMATION" in your manual (PDF).
Caution
When mounting the instrument to the tripod, tighten the centering screw
securely. Failure to tighten the screw properly could result in the instrument
falling off the tripod, causing injury.
Tighten securely the leg fixing screws of the tripod on which the instrument is
mounted. Failure to tighten the screws could result in the tripod collapsing,
causing injury.
Do not carry the tripod with the tripod shoes pointed at other persons. A person
could be injured if struck by the tripod shoes.
Keep hands and feet away from the tripod shoes when fixing the tripod in the
ground. A hand or foot stab wound could result.
Tighten the leg fixing screws securely before carrying the tripod. Failure to
tighten the screws could lead to the tripod legs extending, causing injury.
Warning
Do not use within the vicinity of hospitals. Malfunction of medical equipment
could result.
Use the instrument at a distance of at least 22 cm from anyone with a cardiac
pacemaker. Otherwise, the pacemaker may be adversely affected by the
electromagnetic waves produced and cease to operate as normal.
Do not use onboard aircraft. The aircraft instrumentation may malfunction as a
result.
Do not use within the vicinity of automatic doors, fire alarms and other devices
with automatic controls as the electromagnetic waves produced may adversely
affect operation resulting in an accident.
Precautions for Safe Operation
Using the Battery
Battery
Charger
(110 to 240 V AC)
To outlet
տ
վ
ր
ց
1
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2
Battery (BDC70) . . . . . . . . . . . . . . . . . . . . . . . 1
3
Battery charger (CDC68A) . . . . . . . . . . . . . . . 1
4
Power cable (EDC113A/113B/113C etc.) . . . . 1
5
Lens cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
6
Lens hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
7
Tool pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
8
Precision screwdriver . . . . . . . . . . . . . . . . . . . 1
9
Lens brush . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
10 Hexagonal wrench (1.3 mm/2.5 mm) . . . 1 each
11 Silicon cloth. . . . . . . . . . . . . . . . . . . . . . . . . . . 1
12 Quick Manual (This sheet) . . . . . . . . . . . . . . . 1
13 CD-ROM (Operator's manual) . . . . . . . . . . . . 1
14 Laser caution sign-board . . . . . . . . . . . . . . . . 1
15 Carrying case . . . . . . . . . . . . . . . . . . . . . . . . . 1
16 Carrying strap . . . . . . . . . . . . . . . . . . . . . . . . . 1
17 Export restrictions card (Be sure to read) . . . . 1
• A dedicated power cable for the country or the area where the instrument is purchased is attached.
• Instruments with a laser plummet also include a 1.5 mm hexagonal wrench.
• Instruments with a plate level also include an adjusting pin.
• The Operator's manual is an electronic manual provided in a CD-ROM in PDF format. It is recommended that the manual
files are backed up by transferring to your PC etc. Adobe Acrobat Reader DC is necessary in order to view these documents.
The latest version of Acrobat Reader DC can be downloaded from the Adobe homepage.
• Some types of USB flash drives may not be recognized on the instrument. Even if the procedure of SD formatting enables
any USB flash drives to be recognized, TOPCON CORPORATION cannot guarantee safe operation of them.
Battery
Battery
Cover
Charging lamp
Charging: Flashing.
Charging completion: Lighting up.
Charging time: About 5.5 hours
Press the power key to power ON.
Press and hold (about 1 sec) power key to power OFF.
• If you are experiencing problems with the software, depress the reset
button to reboot the program forcibly. Use a provided hexagonal
wrench (1.3 mm/1.5 mm) or a tapered rod like a pin to depress down
the reset button.
• Avoid using any sharp implement like a needle. Malfunction of the
instrument could result.
• Pressing down the Reset button may result in file and folder data being
lost.
Reset button
Power ON/OFF
GM-100 series
Quick Manual
1019165-01-A
Power key
GM-100_Quick_E.fm 1 ページ ２０１７年５月２２日 月曜日 午後２時５２分
For more information contact Synergy Positioning Systems or
visit the Synergy Positioning Systems website at www.synergypositioning.co.nz
All branches: Phone 0800 867 266 Email: [email protected]
