131
19. CHANGING THE SETTINGS
Setting a password allows you to protect important information such as measurement data.
No password was set when the instrument was shipped. When setting a password for the first time,
leave the "Old password" box blank.
When a password has been set, the password screen will appear when the instrument is powered ON.
Input the password to continue.
• Password can be up to 16 characters in length. Input characters will be displayed as asterisks.
• To deactivate the password function, perform the new password setting procedure but enter a
"space" in the "New password" box.
G
• The password function will not be canceled when a cold boot is performed.
• The password must be input after powering ON the instrument from an external device when a
password has been set.
Items set
Old password
: Input current password
New password
: Input the new password
New password again
: Input the new password again
19.9
Changing Password
Summary of Contents for DS-101AC
Page 175: ......
