19. CHANGING THE SETTINGS
120
1. Press
[LIST]
to display a list of all recorded
targets.
•
[ADD]
: Displays <Reflector list>. Select the
desired target from this list and press
[OK]
to
register in the list in <Reflector setting>. Up to a
maximum of 6 targets can be recorded.
•
[DEL]
: Deletes the selected target.
2. To edit a target, select the desired target and
press
[EDIT]
. <Reflector/edit> is displayed.
Select/input relevant information for the target.
Reflector
: Prism/Sheet/N-Prism/360° Prism
Const.
: -99 to 99 mm
Aperture
: 1 to 999 mm
• When selecting "N-Prism" in "Reflector", prism
constant correction values and aperture are set
to "0" automatically.
3. Press
[OK]
in the screen of step 2 to save edited
information and return to <Reflector setting>.
Press
[OK]
to return to <EDM configurations>.
It is possible to allocate tabs in Observation mode and Menu mode to suit the measurement
conditions. It is possible to operate the instrument efficiently because unique tab allocations can be
preset to suit various applications and the ways that different operators handle the instrument.
• The current tab allocations are retained until they are revised again, even when the power is cut off.
• Press
[CLEAR]
in <Customize/Select screen> to return all customized configurations including
screen controls, status bar settings, and softkey allocations to their previous settings.
• One screen can contain a maximum of 5 tabs.
G
• When tab allocations are recorded and registered, the previously recorded tab settings are cleared.
I
Tab allocations
The following are tabs allocated when the instrument was shipped and tabs that can be defined
by the user.
19.4
Allocating User-defined Tabs
Summary of Contents for DS-101AC
Page 175: ......
