Topcon AGA5495, Operator'S Manual

Page: 60 / 144

6.1. Selecting a vehicle
42
l
Antenna : Sets whether the GPS receiver has an internal or
external antenna.
6.1. Selecting a vehicle
Selects a vehicle from a previously defined list of vehicle profiles.
This is blank when the console is first used.
To select a vehicle:
1. Select
Vehicle / Select .
2. Highlight the required vehicle and confirm, or:
Select to import a vehicle profile from a USB.
6.2. Creating a new vehicle
Creates a new vehicle profile for the vehicle on which the console is
mounted.
To create a new vehicle profile:
1. Select
Vehicle
/
New
.
A list of pre-defined factory vehicle templates displays. Templates
contain standard measurements and steering parameter information
where this is available.
Measurements can be adjusted to correct for the particular vehicle, tire
size and so on when geometry is confirmed in the following section.
Steering parameters control how the vehicle will respond to guidance
and these can be fine-tuned later in the process in Auto Steering, page
95. If steering continues to be unsatisfactory once setup is complete
and after tuning the auto steering, contact your dealer.
2. Select the vehicle manufacturer. Use the scroll bar to see the
complete list. If the required manufacturer is not available, select
one that is most like the vehicle being used. If none of the choices