29
SYSTEM DIAGRAM
Area 3
In Area 3, set or change the small pupil diaphragm and the internal fixation target.
Set or change the data with the following buttons.
Internal fixation target position adjustment button
Tap the upper, lower, right and left buttons when the fixation target is displayed. The target position
can be moved. After 3 seconds have passed since the last operation, the fixation target disappears
on the fundus image. (*)
* When you select "CONSTANT" after tapping the buttons in the following order "[SET UP] (setting
menu) button"
"PAGE 2: Photography Setting"
"Fixation"
"TYPE", the fixation target does
not disappear.
Fixation target shape selector button
Tap this button, and two types ("point" and "cross") of the shape the patient sees are changed to
each other. The display on the screen is not changed.
[Manual] button
: Press the [Manual] button and operate the Z lock tab and [Rough opera-
tion] button to perform optimizing. This button is displayed only when the
"Advance" mode is set.
NOTES
• When pressing the [Manual] button, the Z lock tab indicates the position
against the prism operating range. (Refer to page 107.) The Z lock tab when
pressing the [Manual] button does not have the function to move the displayed
tomogram center position.
[Rough operation] button
Z lock tab
[Rough operation] button
OCT-LFV image ON/OFF
External fixation target selector button
Fixation target shape selector button
Internal fixation target adjustment button
Advance button
