Topcom Protalker PRT-1078, User Manual

Page: 6 / 76

6
Protalker PT-1078
13.15.2 Change the group code
You can select 122 different group codes (0..121)
13.15.3 Entering unit ID / unit name
In one group you can create 16 users. Each user has its own ID (1..16) and name.
13.15.4 Transmitting your unit ID / unit name to other users
When you have successfully entered your unit ID / unit name you can broadcast the ID / name to all other users of your group.
Make sure that all PMR’s are set to the same channel/group code!
13.15.5 Making a call
Call all users
When you call all users in group mode, all units in range will receive the call. Your name will also appear on the display of the other
users and the units will beep (or vibrate in silent mode).
Private call
You can call one individual user by selecting his ID / user name. The other users will not hear this call. Additionally, when the call is
answered you will be able to make a private conversation so no other users of the group will be able to hear you and your called
partner.
The receiver will see the name of the user who is calling and an alert tone will be heard. By pressing a key, the alert tone will stop. If
the receiver of the call presses the PTT - key
within 15 seconds, the conversation between both users will be private. Both users
will see each other’s name on the display. If there is no transmission between the users during 15 seconds, the private channel will
be disabled.
13.15.6 Changing the group channel for all users
Any user in a group has the option to change the group channel for all PMR’s at the same time.
This feature is only available when the PMR is set in group mode!
• Press the SUB/GRP - key the current selected group code will blink
• Use the - key or the - key to select the desired code
• Press the OK - key to confirm
• Press the - key four times (5 times in Group mode)
• Press the OK - key
• Us the - key or the - key to select the unit ID (1..16)
• Press the OK - key to confirm
• Use the - key or the - key to select the character of the
name
• Press the OK - key to go to the next character
• When finished, Press the - key
• Press the - key
• Press the - key again to broadcast the call to all users
All users in range on the same channel and in the same group will now receive the ID and name
of the PMR radio.
Repeat this procedure for all units so all ID’s / user names will be stored in all PMR’s.
11
13 12
6
7
6
13 12
6
13 12
6
7
Make sure that all units have a different ID and name. If two units have the same ID, “FAIL” will
appear on the display when all users are called.
10
10
• Press the - key
• Press the - key again to broadcast the call to all users
• Press the - key
• Use the - key or the - key to select the ID / name of the
user you want to call
• Press the - key again to broadcast the call
• Press the - key three times in Group mode
• Press the OK - key
• Use the - key or the - key to select new channel
• Press the OK - key
All users of the group in range will receive the command and the channel will be changed
automatically.
10
10
10
13 12
10
15
7
6
13
12
6
This function is only available in group mode.
Protalker PT - 1078.book Page 6 Friday, June 4, 2010 1:58 PM