Topcom BW-4753, User Manual

Page: 5 / 106

Heating Blanket BW-4753
5
Heating Blanket BW-4753
ENGL
ISH
The four clasps on the corners can be used to fix the heating blanket tightly to the mattress. This will prevent the blanket
from moving or creasing.
In order to keep the electric heating blanket flat and clean and to reduce abrasion, please cover the blanket with bed
sheet for use. (Don't cover it with blanket or cotton mat, which will prevent the blanket from transmitting heat.)
6 Using the heating blanket
• The heating blanket is equipped with a control unit with 3 positions:
– 2 - maximum temperature;
– 1 - minimum temperature;
– 0 - off
• Check that the control unit switch (A) is in position ‘0’ (lowest) before
connecting it to the mains socket.
• The heating blanket plug (C) and mains plug are fixed to the
control unit.
• Connect the heating blanket plug (C) to the heating blanket
connector (D).
• Connect the mains plug to the mains socket (230V AC/50Hz).
• Place the blanket on that part of your body you wish to heat and select the desired temperature.
• For rapid heating, select level 2, after a few minutes the heating blanket will already be pleasantly warm.
• After use, disconnect the blanket from the mains socket.
7 Technical data
8 Cleaning
• Machine washing of the blanket is possible; however, hand wiping will prolong the life of the blanket.
• To machine wash, remove the control unit and place the blanket in a net bag and seal it.
• Use a small amount of detergent and set the washing machine to a "Delicate Wash" with a maximum
temperature of 40°C . When washed, remove the blanket from the net bag and drape it over a clothes line to dry.
• Do not use clothes pegs to secure it.
WARNING
• The creased part tends to cause high temperature which is very dangerous.
WARNING
The mains socket must be close and easy accessible.
Dimensions
Weight
Rated voltage
Power consumption
Material 150 x 80 cm
1,8 kg
Input: AC 230 V / 50 Hz
60 W
100% polyester
B A
0
0
LIFT
PULL
40C