ToolPRO TPPW26 Instruction Manual Download Page 4

4

5

As soon as you have purchased the pressure washer, we 

recommend that you check to make sure it is intact and 

that you read the operating instructions carefully before 

using it. The purchase receipt for this product is to be 

retained and must be presented if making a claim under 

the terms of the Smart Marketing Group (SMG) warranty. 

Bank account statements are not acceptable for proof of 

purchase.
This warranty does not cover pressure washers 

intended for hire or use in commercial applications or 

in commercial premises. The warranty will under no 

circumstances extend to reimbursement or payment of 

damages, whether direct, indirect or consequential. The 

warranty is void if there is evidence the pressure washer 

has been modified or tampered with in any way or used 

with unauthorised accessories without our consent.
SMG declines any responsibility or liability whatsoever 

arising from misuse or abuse, negligent handling of the 

pressure washer or if the product has not been installed 

or failure to comply with the relevant safety, operating, 

setting and maintenance instructions (see further in this 

manual).
The warranty does not extend to installation or 

disconnection costs.
Any item sent freight forward/collect for repair will be 

refused. Warranty repairs are free of charge, provided 

the appliance is delivered to our service department or 

authorised service agent. The pressure washer will need 

to be returned, adequately protected in a box. SMG will 

not be responsible for any in-transit loss or damage. 

Assistance under the warranty will only be made 

available if the request is made to our customer service 

team on the contact numbers listed below and proof of 

purchase is provided.
This is a repair only warranty you will need to take the 

pressure washer to the authorised service agent after 

contacting our customer service centre.
If the product includes various accessories or components, 

only the defective accessory or component will be 

replaced or repaired.
SMG reserves the right to replace defective parts of the 

product with parts and components of similar quality, 

grade and composition where an identical part or 

component is not available.
Products presented for repair may be replaced by 

refurbished products of the same type rather than being 

repaired. Refurbished parts may be used to repair the 

products.

Damage caused by third party accessories is not 

covered under this warranty. Damage caused to attached 

equipment or third party accessories will not be covered 

under this warranty.
Rust and corrosion are not covered under this warranty.
If a warranty fault is found the freight cost will be credited 

to the owner. If no fault is found the product will be 

returned and any costs associated with the service will 

be charged to the owner.
Blockages caused by spider webs, insects, dirt, or 

accumulated dust and incorrect oil are not covered by 

warranty. SMG reserves the right to replace or repair the 

appliance within the warranty period. Parts found to be 

defective due to a manufacturing default will be replaced 

free of charge.
In the event of SMG choosing to replace the appliance, 

the warranty will expire at the original date of purchase. If 

no warranty fault is found the owner will be advised and 

the product will be returned and any costs associated 

with the service will be charged to the owner.
Our goods come with guarantees that cannot be 

excluded under the Australian Consumer Law. You are 

entitled to a replacement or refund for a major failure and 

for compensation for any other reasonably foreseeable 

loss or damage. You are also entitled to have the goods 

repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure. 

The benefits of this warranty are in addition to any rights 

and remedies imposed by Australian State and Federal 

legislation that cannot be excluded.
In New Zealand, this SMG warranty is in addition to 

the conditions and guarantees which are mandatory as 

implied by the New Zealand Consumer Guarantee Act 

1993. For service, spare parts or product information 

please contact customer service:
Australia: 1300 660 457 
New Zealand: 0800 474 876

COMPLETE WARRANTY STATEMENT – PRESSURE WASHER

Summary of Contents for TPPW26

























Reviews: