10
11
ASSEMBLY INSTRUCTIONS
UNPACKING
Carefully unpack your pressure washer. This pressure
washer is bulky and heavy (22kg), and may require two
(2) people to lift. Dispose of all packing material in an
environmentally responsible manner.
Open carton, gently lift the pressure washer clear of
the carton and packaging, this may require 2 people.
Remove from plastic bag.
NOTE: Plastic bags can be a danger to young children,
dispose of immediately. Always dispose of packaging in
a responsible manner.
ASSEMBLY
Wheels (Pic. 2)
1. Slide the axle into the tube under the frame. Depress
the brass button and push the axle into the tube.
2. Rotate the axle until the button “clicks” and locks
into the hole in the tube.
Handle (Pic. 3A)
1. Push both bolts through frame holes as shown
in Pic 3A.
2. Screw hand wheel on both bolts
Note: Bolt is 2 Stage
A) 1st stage - Bolt on hand wheel, softly tightened,
allows frame to fold.
B) 2nd stage - Tighten firmly to lock handle in place.
Storage Holder (Pic. 3B)
Install metal bracket with screw, tighten fully. Slide
storage holder over metal bracket using the locater on
the plastic storage holder.
Gun/Lance (Pic. 4)
Push the lance into the gun and tighten nut. Slide cover
over the nut.
PIC. 2
PIC. 3A
PIC. 3B
PIC. 4