Customer Helpline
1300 889 028
14
Operating Instructions
7. USING THE SIGHT LIGHT
To turn on the light, press the on/off switch and make sure the forward/reverse
rotation control is on right/left position. When you release the on/off switch, the light
will be off.
LED lighting increases visibility-great for dark or enclosed area.
8. BATTERY CAPACITY INDICATOR
Your tool is equipped with Battery Capacity Indicator. Press the On/Off Switch halfway
or fully, the Battery Capacity Indicator will light up to show the amount of charge left
in the battery.
Fuel Gauge
Capacity
3 lights
>70%
2 lights
40%~70%
1 light
<40%
9. BELT CLIP (SEE FIG H1, H2)
Screw the Belt Clip (6) on the tool with the screw provided in the plastic bag. The Belt
Clip can be cliped on your belt or pocket, etc.
10. OVERLOAD PROTECTION
When overloaded, the motor comes to a stop. Relieve the load on the tool immediately
and release the on/off switch. Restart the tool as normal.
11. TEMPERATURE DEPENDENT OVERLOAD PROTECTION
When using as intended for the power tool cannot be subject to overload. When
the load is too high or the allowable battery temperature of 75 °C is exceeded, the
electronic control switches off the power tool until the temperature is in the optimum
temperature range again.
H1
H2