Customer Helpline
1300 889 028
12
Operating Instructions
1. INSTALLING AND REMOVING THE BATTERY PACK
a) TO REMOVE THE BATTERY PACK (SEE FIG B1)
Depress the Battery Pack Release Button(5) firmly first and then slide the Battery
Pack out from your tool.
b) TO INSTALL THE BATTERY PACK (SEE FIG B2)
Slide the fully charged Battery Pack onto the tool with sufficient force until it clicks
into position.
2. INSERTING A BIT HOLDER, SOCKET OR SCREWDRIVER BIT (SEE FIG C)
Pull the Chuck Sleeve (b) forward. Fully insert the desired bit into the chuck(a) and
release the Chuck Sleeve.
Note:
Try to pull the bit after releasing the Chuck Sleeve to make sure the bit is fully
locked in the chuck.
3. REMOVING A BIT HOLDER, SOCKET OR SCREWDRIVER BIT (SEE FIG D)
Pull the Chuck Sleeve (b) forward. Take the bit out of the Chuck (a) and release the
Chuck Sleeve.
B1
C
B2
D
1
2
a b
a b