ToolKitRC M8, Manual

Page: 13 / 39

@ ToolkitRC 2019
13
=================================
Tip:
1, the battery which was over-discharged or
over-charged, may cause the number of
strings to be recognize falsely, you need to
manually set the correct number of strings.
2, If the number of strings was set incorrectly,
The battery cannot be full charged, or be
overcharged and damaged, please set it
carefully.
3. After the Lixx battery is connected to the
balance port, the number of battery strings
can be more accurately identified.
=================================
5，Current setting
Move the cursor to the charging current [2.0A]
position and press [OK] to modify the charging
current. Turn [Jog wheel] to adjust the value and step
0.1A. Quickly rotate [Jog wheel] to add or subtract