background image

NOTE

 

 

 

 
 
 

 

 
    
     
 

 

 

 

 
 

 

 

 

 
 

 
 
 

 

 

    

         

 

         

   

 

 

 

 
 

 
 

 

 

 

 
 

 
 
 

 

 
   
  

 

    

 

 

 

 

 

 

 
 

 

 

 

 

 

 
 

 

When the engine is running, the battery will 

 

be charged by the charging system of 

 

generator.

 

 

The battery should be charged for long 

         storage periods. Use a charging 

 

current

 

 

less 

 

than 

 

0.15c amperes 

 

(c: battery rated

 

         capacity) when charging the battery.

 Replace the battery.

 8.5.1) Loosen the screws of the battery 

 

maintenance cover and remove the cover.

 

8.5.2) Unhook the battery belt.

 

8.5.3) Remove the black cable from battery 

 

negative (-) terminal, and then remove the red 

 

cable from battery positive (+) terminal.

 

8.5.4) Remove the battery from battery tray, and 

 

replace a new one.

 

8.5.5) Reconnect red cable to battery positive (+) 

 

terminal, and reconnect black cable to 

 

battery negative (+) terminal.

 

 

8.5.6) Re hook the battery belt, and reinstall 

the cover.

 

 

Summary of Contents for HY30i





































Reviews: