TOOLCRAFT KIT77, Assembly Instructions

Page: 3 / 3

• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Contact an expert if you are in doubt regarding the function, safety or installation
of the product.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these assembly instructions,
contact our technical support service or other technical personnel.
Installation
• Refer to the illustrations in these assembly instructions.
• Use the following, additional accessories:
- Work gloves
- Mallet
- Flat screwdriver
Cleaning and care
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
• Use a dry, soft and clean cloth for cleaning.
Disposal
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Load-bearing capacity .................. 350 kg per shelf
Shelf thickness ............................. 6.8 mm
Strut thickness .............................. 1.2 mm
Operating/storage conditions ........ -20 to +60 ºC, 5 – 90 % RH
Dimensions (W x H x D) ............... 1600 x 1800 x 600 mm
Weight .......................................... approx. 43 kg
Assembly instructions
Heavy-duty rack 350 kg
Item no. 2521298
Intended use
The product is intended for storing loads of up to 350 kg per shelf. The shelves can be mounted
at different heights.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
Improper use can furthermore cause hazards such as injuries. Read the assembly instructions
carefully and keep them. Make this product available to third parties only together with its
assembly instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
Part No. Description Qty
Upright brace 4
Shelf 4
Cross brace 8
Longitudinal brace 8
Traverse 8
- Assembly Instructions 1
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.
com/downloads or scan the printed QR code. Follow the instructions on the
website.
Description of symbols
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
Safety instructions
Read the assembly instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this assembly instructions, we assume no liability for any
resulting personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• To handle heavy loads, ask another person for help, in order to avoid injuries (e.g.
back injuries).
• Verify that the delivery content is complete before assembling the product. Do not
assemble the product if the delivery content is not complete.
• Exercise caution when assembling the product! The product has some sharp
corners which pose a risk of injury! There is also a risk of your fingers getting
caught.
• Only carry out the steps required for assembly. Never attempt to modify or repair
the product. Do not make any modifications.
• Perform the installation very carefully. Malfunctions can cause expensive
consequential damage; there is also a risk of injury.
• Do not overload the product. Observe the “Technical data”.
• Distribute the load on the product as evenly as possible.
• Always observe the maximum load capacity of the surface.
•
Place the product on a flat, stable surface only.
• Do not use the product as a climbing aid, e.g. as ladder.
• Check the functioning of the product before starting to work.
•
In case of doubt, do not install the product yourself; have a professional do it for
you.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2521298_v2_0422_02_dm_mh_en