TH2523 Series Operation Manual
Ver1.2
29
4.1.6
Bus Addr
Bus address is used to control and display the current GPIB interface bus address.
Move the cursor to
BUS ADDR
, the following items will be displayed in the soft key zone.
INCR++
Press this key, the instrument increases the number of bus address by 5.
INCR+
Press this key, the instrument increases the number of bus address by 1.
DECR-
Press this key, the instrument decreases the number of bus address by 1.
DECR--
Press this key, this instrument decreases the number of bus address by 5.
The bus address number ranges from 0 to 31.
4.1.7
Time
Set the correct date and time at the local time zone.
For example: 9 o’clock 13 minute and 25 second a.m. on November 12, 2010 will be shown as
10-11-12 09:13:25.
Operations are as follows: Touch the time zone to be modified, the following items will be
displayed.
INCR++
Press this key, the time will increase by 5.
INCR+
Press this key, the time will increase by 1.
DECR-
Press this key, the time will decrease by 1.
DECR--
Press this key, the time will decrease by 5.
4.2
<File Manage>
TH2523 series can save parameters that are set by user to the internal non-volatile memory in
the file format. User can load the file to use these parameters instead of resetting.
This section will introduce the information about the function of Save/Recall.
Notation Explanation:
E: Abbreviation of External, representing external memory, like U disk.
I: Abbreviation of Internal, representing internal memory, like internal Flash.
