◇
72
5.2.4 SYSTem Subsystem Commands
5.2.4.1 Commands for MEA Setup Function
SYSTem:MEA:TRGMODE
To set /inquiry about the TRIGGER MODE for test.
--
Syntax:
Command message: SYSTem:MEA:TRGMODE<mode>
Query message: SYSTem:MEA:TRGMODE ?
--
Data<mode>:
Data format: characters
Data range: 0~3 (0: manual, 1:external, 2:bus, 3:auto)
--
Example:
Set the trigger mode to manual.
Command message: SYSTem:MEA:TRGMODE 0
Query message: SYSTem:MEA:TRGMODE ?
Return value: 0
SYSTem:MEA:TRGDLY
To set /inquiry about the TRIGGER DELAY for test.
--
Syntax:
Command message: SYSTem:MEA:TRGDLY<time>
Query message: SYSTem:MEA:TRGDLY ?
--
Data<time>:
Data format: float
Data range: 0.0~99.9s
Data accuracy: 0.1s
Data unit: s
--
Example:
Set the trigger delay to 1.0s.
Command message: SYSTem:MEA:TRGDLY 1.0
Query message: SYSTem:MEA:TRGDLY ?
Return value: 1.0
SYSTem:MEA:MEAMODE
To set /inquiry about the MEASURE MODE for test.
--
Syntax:
Command message: SYSTem:MEA:MEAMODE<mode>
Query message: SYSTem:MEA:MEAMODE ?
--
Data<mode>:
Data format: characters
Data range: 0~2 (0:normal, 1:repeat, 2:cycle)
--
Example
：
Set the measurement mode to normal.
Command message: SYSTem:MEA:MEAMODE 0
Query message: SYSTem:MEA:MEAMODE ?
Summary of Contents for TH9110
Page 42: ...42 Take the External Power Supply as an Example...
Page 43: ...43...
