171
Table 9-1 DISP Commands List
9.2.2
FUNC Commands
Title
Commands
Description
Output
Switch
:FUNC:OUTP 0
Turn on AC output
:FUNC:OUTP 1
Turn off AC output
:FUNC:OUTP?
Query current output state. Return 0 or 1
Test Mode
:FUNC:RM:MANU
Set the test mode as manual
:FUNC:RM:PROG
Set the test mode as programmed control
:FUNC:RM?
Query the current test mode. Return 0 or 1
Exit
:FUNC:EXIT
Exit result display status
Save
:FUNC:SR
Save the test results when the result display mode is ALL
Trigger
:FUNC:TRIG
Manually trigger a surge drop
MANU
MEM
:FUNC:MEM:MANU <value>
Set the number of the memory sequence in manual mode
:FUNC:MEM:MANU?
Query the number value of the memory sequence in manual
mode
Voltage
:FUNC:VOLT:MANU <value>
Set the voltage value in manual mode
:FUNC:VOLT:MANU?
Query the set voltage value in the current manual mode
V Mode
:FUNC:VOLT:MODE:MANU:AU
TO
Set the voltage output in manual mode to AUTO mode
:FUNC:VOLT:MODE:MANU:HIG
H
Set the voltage output in manual mode to HIGH mode
:FUNC:VOLT:MODE:MANU?
Query the voltage output mode in manual mode. Return 0 or
1
Frequency
:FUNC:FREQ:MANU <value>
Set the set frequency value in manual mode
:FUNC:FREQ:MANU?
Query the set frequency value in manual mode
Current
High Limit
:FUNC:CURR:HILMT:MANU
<value>
Set the current high limit in manual mode
:FUNC:CURR:HILMT:MANU?
Query the current high limit value in manual mode
Current
Low Limit
:FUNC:CURR:LOLMT:MANU
<value>
Set the current low limit value in manual mode
:FUNC:CURR:LOLMT:MANU?
Query the current low limit value in manual mode
SD Voltage
:FUNC:SD:VOLT:MANU
<value>
Set the voltage value of the surge drop in manual mode
:FUNC:SD:VOLT:MANU?
Query the voltage value of the surge drop in manual mode
SD Site
:FUNC:SD:SITE:MANU <value>
Set the site where the surge drop appears in manual mode
:FUNC:SD:SITE:MANU?
Query the site where the surge drop appears in manual mode
SD Time
:FUNC:SD:TIME:MANU
Set the time width of the surge drop in manual mode
Summary of Contents for TH7105
Page 14: ...9...
