TomTom Rider 400 User Manual Download

Page: 8 / 153

New in this release

Version 17.1

Rider 42, Rider 420, Rider 520

Touch Sensitivity

You can now choose higher or lower sensitivity settings for the buttons on your TomTom Rider.

To learn more go to

Touch Sensitivity

Pre-loaded biker routes

On the Rider 450, some of the most breathtaking rides have been pre-installed on your TomTom
Rider.

To learn more go to

Navigating using a saved route

in this User Manual, and for details of the routes

go to

tomtom.com

On all models

Quick search and Step-by-step search

You can now choose between two different ways of searching for an address or a POI.

To learn more go to

Choosing which search to use

in this User Manual.

Using community POI lists

You can now show your biker-friendly imported community POI lists permanently on the map.

To learn more go to

Using community POI lists

in this User Manual.

Pre-plan your rides with MyDrive

You can plan a route on the MyDrive website, send it to your TomTom Rider, and do much more.

To learn more go to

Syncing using TomTom MyDrive

Advanced Lane Guidance in a split screen

As you approach highway exits and junctions you can now view map guidance and lane guidance
side-by-side in a split screen.

To learn more go to Advanced Lane Guidance in this User Manual.

Quickly report a safety camera or risk zone

You can now tap the safety camera or risk zone symbol in the speed panel to report a safety camera
or risk zone.

To learn more, go to Reporting a new safety camera or Reporting a risk zone in this User Manual.

Read aloud traffic messages

Your device now reads aloud traffic messages about traffic events on your route.

What's new

Summary of Contents for Rider 400


























































































































































Search results

Summary of Contents for Rider 400

Reviews:

Related manuals for Rider 400

Brands by name

Popular brands

TomTom Rider 400, User Manual

Search results

Summary of Contents for Rider 400

Reviews:

Related manuals for Rider 400

Brands by name

Popular brands