TomTom Rider 400, User Manual

Page: 33 / 153

33
The map view
The map view is shown when you have no planned route. Your actual location is shown as soon as
your Rider has found your GPS location.
You can use map view in the same way as you might look at a traditional paper map. You can move
around the map using
gestures , and zoom using the zoom buttons.
Important : Everything on the map is interactive, including the route and the map symbols - try
selecting something and see what it does!
Tip : To open a pop-up menu for an item on the map, for example a route or a POI, select the item
to open the menu. To select a location on the map, select and hold the location until the pop-up
menu opens.
The map shows your current location and many other locations such as your My Places locations.
If you have not planned a route, the map is zoomed out to show the area around your location.
If you have planned a route, your complete route is shown on the map. You can add stops to your
route directly from the map. When you start to drive, the guidance view is shown.
What's on the screen