TomTom Rider 400 User Manual Download

Page: 23 / 153

Statistics for your current trip

To see statistics for the trip you are riding now, select the

Since --/--/--

tab.

To start a new trip, select the

Clear trip

button, just like resetting an mileometer in a car.

After stopping your bike, if you don't press the

Clear trip

button, the statistics just carry on increment-

ing when you start moving again. This means you get accurate statistics for trips that span several
days or several rides within a day.

Important

: If you do a factory reset, the all-time tab is reset back to zero values!

Using quick settings

Quick settings make it easier for you to use a range of settings when wearing gloves.

Using quick settings you can do the following:



Switch voice instructions on or off.



Mute the volume.



Switch between lighter and darker colors.



Change the volume of instructions.

See Other buttons and

Volume control

for more details.

Important

: When using a headset, the volume control may not be available because your headset

doesn't support remote volume control. If this is the case, use the volume control button on the
headset itself to change the volume.

To use quick settings, select the quick settings button in the main menu,

the map view

the guidance

view

Summary of Contents for Rider 400


























































































































































Search results

Summary of Contents for Rider 400

Reviews:

Related manuals for Rider 400

Brands by name

Popular brands

TomTom Rider 400, User Manual

Search results

Summary of Contents for Rider 400

Reviews:

Related manuals for Rider 400

Brands by name

Popular brands