29
1.
Remove the rubber cap from the GPS antenna connector.
2.
Insert the plug of the GPS antenna into the GPS antenna connector on the LINK 510.
3.
Prepare a smooth, clean, oil free and dry surface on the windscreen.
4.
Attach the antenna to the prepared surface so that the top side has a clear view of the sky.
Either locate a smooth metal surface or use the extra adhesive pad.
Mounting the external mobile network antenna
If you install the LINK 510 in a position where it has poor reception, you need to use the external
GSM antenna accessory from TomTom Telematics, Art. no. 9KLE.001.03, which comes with an
adhesive pad. The external GSM antenna from TomTom Telematics is not part of the standard
LINK 510 product package.
Check if your LINK 510 has mobile network reception.
Important
Only use the GSM antenna from TomTom Telematics, otherwise mobile network performance
may be poor or not work at all.
Tinted metallised windscreens or those with integrated filament heating may prevent good
reception. In this case, place the antenna in the rear window or on the outside of the vehicle.
Install the antenna in a place where it is unobstructed by metal objects. The antenna must be
placed with minimum 5 cm (2 inches) distance to metal objects. The top side of the antenna must
not be obstructed by metal items.
The antenna must be placed with the adhesive pad on an oil free, dry and clean surface.
Extreme temperature changes or differences can affect the adhesive property of the pad.
1.
Remove the rubber cap from the GSM antenna connector.
2.
Insert the plug of the mobile network antenna into the GSM antenna connector on the LINK
510.
